Search for articles
Navigate
Topics
Language
Share
Order online now
Availability
Not in stock. We will obtain the article for you.
Estimated manufacturer's time of delivery: 2-3 days
updated: 18.12.2015
Information on currency
EUR 98.98 = GBP 71.92 EUR 83.18 = GBP 60.44 (€1=GBP0.72660)
EUR 98.98 = USD 107.30 EUR 83.18 = USD 90.18 (€1=USD1.0841)
EUR 98.98 = CAD 148.42 EUR 83.18 = CAD 124.73 (€1=CAD1.4995)
EUR 98.98 = AUD 149.43 EUR 83.18 = AUD 125.58 (€1=AUD1.5097)
More from ROBOT ELECTRONICS
WIFI002 - Wireless Relay Module
Devantech
Overview
The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 1A at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals. The Relays on the WIFI002 can be controlled from the inputs on the WIFI484. This offers the opportunity to construct a system where an input can control an output anywhere on the earth provided both locations are connected to the network/internet.
| WIFI002 | |
|---|---|
| Relays | 2 |
| Power | 12V DC adaptor, supplied separately |
| WIFI setup | via USB |
| Configuration & Test interface | HTTP (webpage) |
| Control interface | TCP/IP |
| Relay current | Up to 16Amp @24vdc or 250vac |
| Connections | Screw Terminals for N/O N/C and Common contacts |
Free Android and iPhone Apps are available to remotely control this module.
Operating Temperature
-20°C to +70°C
LED indication
The WIFI002 provides an LED to indicate each of the relay states and three for board status, these are:
- Board power - red LED
- WIFI connected - yellow LED
- USB connected - green LED
Relay power rating
If the contact load voltage and current of the relay are in the region enclosed by the solid and dotted lines in the figure below, the relay can perform stable switching operation. If the relay is used at a voltage or current exceeding this region, the life of the contacts may be significantly shortened.
| load type | Typical applications | Rating |
Max DC load capacity
|
| AC1 | Non inductive or slightly inductive loads |
16A @ 250V AC | |
| AC15 | Control of electromagnetic load (>72VA) |
3A @ 120V AC 1.5A @ 240V AC |
|
| AC3 | Control of motor | 750W | |
| DC1 | Non inductive or slightly inductive loads |
16A @ 24V DC | |
| DC13 | Control of electromagnetic loads |
0.22A @ 120V DC 0.1A @ 250V DC |
Download
A full datasheet for the relays used on the WIFI002 is here.
Connections
Connection of the WIFI002 to your network
The WIFI002 is configured to connect to your network by means of a USB connection and configuration program, which can be downloaded at the manufacturer's site (see link at bottom).
Mapped inputs
Digital inputs of the ETH484, ETH044, ETH8020 or WIFI484 are able to be configured to remotely control outputs on all of Devantech's new ethernet relay boards (both wired and WIFI), the older ETH-RLY02 and ETH-RLY16 are not compatible however. The mapped inputs offer simple linking and versatile usage, an input in one country can control a output in another, or across a small network.
Possible target boards are:
The independent inputs can be mapped to different relays (on the same or different boards). As address of target board you can enter an IP address or hostname (which will be converted to an IP address by the DNS server supplied in the board configuration). If the module is on the local network then you can use the assigned IP address, if the target is over the internet then you need to supply the gateway in the configuration (internet source IP like your router) and the "Address of target board" is the IP address of the targets internet connection (to point at the router).
Dimensions
Accessories
PP-SW4047D universal mains adapter
Manufacturer's data
Technical Specification - link to the manufacturer
Accessories
Product information for: WIFI002 - 2 x 16A WIFI relay
Publishing date (date of last technical specification): 2015-12-09
Shipping weight: 200 g
Manufacturer: Devantech
Brand: ROBOT ELECTRONICS
Article number: WIFI002
The article WIFI002 - 2 x 16A WIFI relay is part of the following categories:
Customer Groups > Private Customers > Robot Electronics > Relay
ROBOT ELECTRONICS
ETH044 - 5Amp 4 Channel dimmable SSR module
EUR 132.98
incl. VATEUR 111.75
excl. VAT
ROBOT ELECTRONICS
ETH0621 - 24v Motor controller and ethernet relay module
EUR 98.98
incl. VATEUR 83.18
excl. VAT
Customer Groups > Private Customers > Robot Electronics > Relay Modules and suitable 12vdc Mains Adapter
.
