Search for articles

Navigate

Topics

Language

Share

Order online now

EUR 87.98 EUR 73.93
Price incl. VAT Price excl. VAT
plus EUR 5.95 shipping costsplus EUR 5.00 shipping costs

Immediate delivery

Available for immediate delivery while stock lasts.

4 in stock
updated: 12.01.2016

Information on currency

EUR 87.98 = GBP 65.73 EUR 73.93 = GBP 55.23 (€1=GBP0.74705)
EUR 87.98 = USD 95.79 EUR 73.93 = USD 80.49 (€1=USD1.0888)
EUR 87.98 = CAD 134.93 EUR 73.93 = CAD 113.38 (€1=CAD1.5336)
EUR 87.98 = AUD 136.51 EUR 73.93 = AUD 114.71 (€1=AUD1.5516)

More from ROBOT ELECTRONICS

You are here: Main page › Components › ETH484.shtml

ETH484 Ethernet Relay

Devantech

Overview

The ETH484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals. A new feature has been added that allows the digital inputs to remotely control relays or digital outputs on ETH008, ETH484 or ETH8020. This offers the opportunity to construct a system where an input can control an output anywhere on the earth provided both locations are connected to the network/internet.

Operating Temperature

-40°C to +70°C

LED indication

The ETH484 provides a red LED mounted immediately next to each relay to indicate whether it is in a powered state (LED on), there is also two LED's mounted in the Ethernet connector which will flash with Ethernet traffic. Finally there is a red power LED alongside the screw terminals.

Relay power rating

If the contact load voltage and current of the relay are in the region enclosed by the solid and dotted lines in the figure below, the relay can perform stable switching operation. If the relay is used at a voltage or current exceeding this region, the life of the contacts may be significantly shortened.

load type	Typical applications	Rating	Max DC load capacity
AC1	Non inductive or  slightly inductive loads	16A @ 250V AC
AC15	Control of   electromagnetic load   (>72VA)	3A @ 120V AC    1.5A @ 240V AC
AC3	Control of motor	750W
DC1	Non inductive or  slightly inductive loads	16A @ 24V DC
DC13	Control of electromagnetic   loads	0.22A @ 120V DC  0.1A @ 250V DC

Download

A full datasheet for the relays used on the ETH484 is here.

Connections

Mapped inputs

Digital inputs of the ETH484, ETH044, ETH8020 or WIFI484 are able to be configured to remotely control outputs on all of Devantech's new ethernet relay boards (both wired and WIFI), the older ETH-RLY02 and ETH-RLY16 are not compatible however. The mapped inputs offer simple linking and versatile usage, an input in one country can control a output in another, or across a small network.
Possible target boards are:

• ETH002
• ETH008
• ETH044
• ETH0621
• ETH484
• ETH8020
• WIFI002
• WIFI008
• WIFI484
• WIFI8020

The independent inputs can be mapped to different relays (on the same or different boards). As address of target board you can enter an IP address or hostname (which will be converted to an IP address by the DNS server supplied in the board configuration). If the module is on the local network then you can use the assigned IP address, if the target is over the internet then you need to supply the gateway in the configuration (internet source IP like your router) and the "Address of target board" is the IP address of the targets internet connection (to point at the router).

Board dimensions

Manufacturer's data

Technical Specification - link to the manufacturer

Accessories

Product information for: ETH484 - Ethernet Relais Modul

Publishing date (date of last technical specification): 2013-11-01
Length: 143 mm
Width: 84 mm
Weight: 150 g
Shipping weight: 200 g
Manufacturer: Devantech
Brand: ROBOT ELECTRONICS
Article number: ETH484

The ETH-RLY16 provides four volt free contact relay outputs with a current rating of up to 16Amp each.

---

The article ETH484 - Ethernet Relais Modul is part of the following categories:

Customer Groups > Private Customers > Robot Electronics > Relay

Customer Groups > Private Customers > Robot Electronics > Relay Modules and suitable 12vdc Mains Adapter

.

---

Contact us

Name*:
email address*:
Message*: Captcha*:

* These fields are mandatory.