Search for articles

Navigate

Topics

Language

Share

Order online now

EUR 62.97 EUR 52.92
Price incl. VAT Price excl. VAT
plus EUR 5.95 shipping costsplus EUR 5.00 shipping costs

Immediate delivery

Available for immediate delivery while stock lasts.

2 in stock
updated: 18.12.2015

Information on currency

EUR 62.97 = GBP 45.75 EUR 52.92 = GBP 38.45 (€1=GBP0.72660)
EUR 62.97 = USD 68.27 EUR 52.92 = USD 57.37 (€1=USD1.0841)
EUR 62.97 = CAD 94.42 EUR 52.92 = CAD 79.35 (€1=CAD1.4995)
EUR 62.97 = AUD 95.07 EUR 52.92 = AUD 79.89 (€1=AUD1.5097)

More from ROBOT ELECTRONICS

You are here: Main page › Components › ETH-RLY02.shtml

ETH-RLY02 Ethernet Relay

Devantech

Overview

The ETH-RLY02 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is power from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals.

Operating Temperature

-40°C to +70°C

LED indication

The ETH-RLY02 provides a red LED mounted immediately next to each relay to indicate whether it is in a powered state (LED on), there is also two LED's mounted in the Ethernet connector which will flash with Ethernet traffic. Finally there is a red power LED alongside the screw terminals.

Relay power rating

If the contact load voltage and current of the relay are in the region enclosed by the solid and dotted lines in the figure below, the relay can perform stable switching operation. If the relay is used at a voltage or current exceeding this region, the life of the contacts may be significantly shortened.

load type	Typical applications	Rating	Max DC load capacity
AC1	Non inductive or  slightly inductive loads	16A @ 250V AC
AC15	Control of   electromagnetic load   (>72VA)	3A @ 120V AC    1.5A @ 240V AC
AC3	Control of motor	750W
DC1	Non inductive or  slightly inductive loads	16A @ 24V DC
DC13	Control of electromagnetic   loads	0.22A @ 120V DC  0.1A @ 250V DC

Download

A full datasheet for the relays used on the ETH-RLY02 is here.

Accessories

PP-SW4047D universal mains adapter

Manufacturer's data

Technical Specification - link to the manufacturer

Accessories

Product information for: ETH-RLY02 Ethernet Relay

Publishing date (date of last technical specification): 2012-07-01
Weight: 70 g
Shipping weight: 90 g
Manufacturer: Devantech
Brand: ROBOT ELECTRONICS
Article number: ETH-RLY02

The ETH-RLY02 provides two volt free contact relay outputs with a current rating of up to 16Amp each.

---

The article ETH-RLY02 Ethernet Relay is part of the following categories:

Customer Groups > Private Customers > Robot Electronics > Relay

Customer Groups > Private Customers > Robot Electronics > Relay Modules and suitable 12vdc Mains Adapter

.

---

Contact us

Name*:
email address*:
Message*: Captcha*:

* These fields are mandatory.