MD25 - Dual 12Volt 2.8Amp H Bridge Motor Drive

For 2 EMG30 motors

Devantech

Designed to work with our EMG30 gear motors, the MD25 will drive two motors. Controllled by Serial or the I2C Interface. Two modes of operation, direct individual control of the motors or the ability to send a speed and a turn commands.

Overview

The MD25 is a robust I2C or serial, dual motor driver, designed for use with our EMG30 motors. Main features are:

• Reads motors encoders and provides counts for determining distance traveled and direction.
• Drives two motors with independent or combined control.
• Motor current is readable.
• Only 12v is required to power the module.
• Onboard 5v regulator can supply up to 1A peak, 300mA continuously to external circuitry.
• Steering feature, motors can be commanded to turn by sent value.
• Variable acceleration and power regulation also included

Connections

Motor Voltage

The MD25 is designed to work with a 12v battery. In practical terms, this means the 9v-14v swing of a flat/charging 12v battery is fine. Much below 9v and the under-voltage protection will prevent any drive to the motors.

Motor Noise Suppression

When using our EMG30 encoded motors, you will find that a 10n noise suppression capacitor has already been fitted. Other motors may require suppression. This is easily achieved by the addition of a 10n snubbing capacitor across the motors. The capacitor should also be capable of handling a voltage of twice the drive voltage to the motor.

Leds

The Red Power Led indicates power is applied to the module. A Green Led indicates communication activity with the MD25. In I2C mode the green led will also initially flash the address it has been set to. See I2C documentation for further details.

Board dimensions

Manufacturer's data

Technical Specification - link to the manufacturer

Accessories

Suitable accessory for

Product information for: MD25 - 12V 2.8A Dual H-Bridge Motor Driver

Publishing date (date of last technical specification): 2010-11-10
Weight: 24 g
Shipping weight: 50 g
Manufacturer: Devantech
Brand: ROBOT ELECTRONICS
Article number: DEV-MD25
Manufacturer's part number: MD25

The article MD25 - 12V 2.8A Dual H-Bridge Motor Driver is listed in the following categories:

Customer Groups > Private Customers > Robot Electronics > Drive